PRE ORDER Deposit For Motorhome Cocoon Breeze XL Inflatable Awning – Back In Stock April
2 YEAR WARRANTY ON THIS PRODUCT Back In Stock April Pre Order Now Only 100 Arriving . Pay £10 Now and the Balance of £599 Before Dispatch in April Total to pay: £609 . . Suitable for vehicles with a height between 240-290cm .Fit . The Cocoon Breeze XL is our largest and most popular Motorhome Awning with plenty of living and sleeping space. It includes a 5 berth bedroom inner tent and the inflatable beams make setting up a Breeze, only taking 15 minutes to erect. The Cocoon Breeze is much quicker and simpler to pitch than a poled awning. Will this awning fit your Campervan? – Click here EXTRAS & PACKAGING Optional Extras: Footprint Groundsheet Carpet Porch Extension Extra Door DIMENSIONS & DETAILS How to attach the Awning to your Motorhome: The best way to attach the awning is by threading the beading on the tunnel into the awning rail or the Guttering using the Figure of Eight attachment. If your Motorhome does not have either of these, there are straps included which go over the top of the vehicle, either side of a pop-up roof if you have one, and peg down the other side. Figure of eight Attachment Drive away kits: 4-6mm 6-6mm Will fit: All Vehicles between a height of 240cm and 290cm Colour: Grey/Blue Height (cm): 210cm (82.7”) Length (cm): 455cm (179.1”) Width (cm): 350cm (137.8”) Packed dimensions (cm): 82cm x 43cm x 43cm (32.3” x 16.9” x 16.9”) Weight (kg): 30kg Hydrostatic Head: 5,000mm H/H Material: 150D Oxford Sewn-in groundsheet: Yes Awning Beading: 6mm Poles: Reinforced TPU Inflatable Beams Canopy poles: Yes Number of doors: 3 Windows: 3 Pitching time: 15 Minutes Bedroom inner tent: Yes (5 Berth) Standing room: Yes Pegs included: Yes Pump Included: Yes Carpet available: Yes Footprint groundsheet available: Yes Be aware that Condensation is always a potential issue in all tents and awnings. Tents and Awnings, such as this one with Air Beams – which are full of cold air – are more prone to condensation due the warm air inside reacting on the cold air of the beams. This will appear as small pools of water around the base of the beams. This isn’t water from outside but inside. We do all we can to minimise this by putting in lots of ventilation but there is more you can do to prevent condensation. See our guide here.